Obtain customer product data

分析客戶所提供的資料，明確手板模型制作所需的材料手板效果數量交貨期等。

Analyze the information provided by the customer, clarify the materials required for the production of the prototype, the quantity of prototype effects, and the delivery date.

編程師編程。

Programmers program.

編程師傅根據手板模型的3D圖進行編程并安排CNC操機員加工，而且多數手板模型制作加工公司都會用到proe這個工具，在業務過程中，proe這個工具很大程度上把客戶的需求信息描述得很清楚，技術可以很好的根據這些分析的數據開展工作。

Programmers program based on the 3D diagram of the prototype and arrange CNC operators for processing. Moreover, most prototype production and processing companies use the PROE tool. In the business process, the PROE tool largely describes the customer's demand information clearly, and the technology can effectively carry out work based on these analyzed data.

手工人員分工

Labor division for manual personnel

因為比較簡單的手板模型零件無需通過CNC加工便可完成制作，只需手工制作便能達到要求。

Because relatively simple prototype parts do not need to be processed by CNC to complete the production, only manual production is required to meet the requirements.

手板模型測圖

Hand board model mapping

根據客人的要求對所有的手板模型零件進行測量驗證。

Measure and verify all prototype parts according to customer requirements.

手板模型組裝

Handboard model assembly

手板零件經過測圖沒有問題之后，可以進行零件的組裝工作了，手板的裝配是驗證產品設計是否合理，是否達到預期功能的必不可少的環節。手板模型在裝配過程中如果發現有問題，只有2種辦法可以處理。一，手工修改；二，重新設計。

After the prototype parts have been mapped and found to be correct, they can be assembled. The assembly of the prototype is an essential step in verifying whether the product design is reasonable and whether it meets the expected functions. If any problems are found during the assembly process of the prototype, there are only two ways to handle them. 1、 Manual modification; 2、 Redesign.

手板模型零件打磨拋光

Grinding and polishing of hand board model parts

前幾步如果都沒有問題了，便可將零件打磨拋光。打磨拋光是為了表面處理，但是有些不可見的零件可以選擇不打磨拋光。

If there are no problems in the first few steps, the parts can be polished and polished. Polishing is for surface treatment, but some invisible parts can choose not to be polished.

手板模型的表面處理

Surface treatment of hand board models

手板模型的表面處理是指噴油或上色。同樣，在征得客戶同意后，我們對于組裝完之后不可見的零件可以不作表面處理。

The surface treatment of the prototype refers to oil spraying or coloring. Similarly, with the consent of the customer, we may not perform surface treatment on parts that are not visible after assembly.

手板模型裝飾設計

Decorative design of hand board model

模型完成后，有的客戶可能還需要做絲印，移印，燙金等裝飾處理，主要是做LOGO或文字處理，在手板模型上做LOGO裝飾也是很多公司常用的方法。

After the model is completed, some customers may also need to perform decorative treatments such as screen printing, transfer printing, and stamping, mainly for logo or text processing. It is also a common method for many companies to use logo decoration on hand models.

手板模型準時交貨

On time delivery of the prototype

本文由山東快速成型友情奉獻.更多有關的知識點擊:http://www.nicebrian.com我們將用真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is dedicated by Shandong Rapid Prototyping Friendship. For more relevant knowledge, click on: http://www.nicebrian.com We will provide you with comprehensive services with a sincere attitude. We will gradually contribute more relevant knowledge to everyone. Stay tuned