手板加工設備CNC機床有以下要求：

CNC machine tools for handboard processing equipment have the following requirements:

機床要有好的剛性和與承載能力；

The machine tool should have good rigidity and bearing capacity;

工作臺面尺寸要與手板外形尺寸相適應；

The size of the worktable should be compatible with the overall size of the hand board;

要有高的精度及精度保持性；

It should have high accuracy and accuracy retention;

要能快率高地去除余量，且有很高的可靠性；

It should be able to remove the residual quickly and efficiently with high reliability;

要求機床能多軸聯動，且配有大信息容量的數控系統。

The machine tool is required to be multi axis linkage and equipped with a large information capacity CNC system.

CNC手板加工的特殊要求：

Special requirements for CNC hand board processing:

CNC手板需要在實芯金屬模塊上加工出形狀復雜的空間曲面；

CNC hand board needs to process complex spatial surface on solid metal module;
              

CNC手板外形為長方體或正方體，很少有窄長形的，主要加工量集中在凹模和凸模上；

The shape of CNC hand board is cuboid or cube, few of which are narrow and long, and the main processing capacity is concentrated on the die and punch;

CNC板模型對手板加工精度的要求也越來越高；

CNC plate model has higher and higher requirements for the machining accuracy of the hand plate;

CNC手板加工就要滿足效率高、快速和長時間滿負荷不停運行等要求。

CNC handboard processing needs to meet the requirements of high efficiency, fast and long time full load non-stop operation.

cnc手板制作過程

The manufacturing process of CNC hand board

編程：編程人員分析3D圖紙，編寫控制數控加工程式語言；

Programming: programmers analyze 3D drawings and write NC programming language;

CNC加工：cnc加工把多余的地方去掉，從而得到手板的雛形；

CNC processing: CNC processing to remove the redundant place, so as to get the prototype of the hand board;

手工處理；

Manual processing;

表面處理：噴漆、絲印、電鍍、特殊的有鐳雕、陽極氧化、拉絲等；

Surface treatment: spray painting, silk screen printing, electroplating, special radium carving, anodizing, wire drawing, etc;

感謝您的閱讀，希望以上內容對您有所幫助，如您想了解更多精彩內容請點擊我們的官網：濟南手板http://www.nicebrian.com。

Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: Jinan Shouban http://www.nicebrian.com .